叉车在装卸货物的时候注意什么？
发布时间：2022-01-13 点击：253
近日在网上有很多关于叉车事件的报道，由此可见叉车的操作安全是很重要的，尤其是在装卸货物的时候。下面山东叉车厂家就给大家科普一下山东叉车在装卸货物的时候要注意哪些事项：
recently, there are many reports about forklift incidents on the internet, which shows that the safety of forklift operation is very important, especially when loading and unloading goods. next shandong forklift truck manufacturer henghua logistics will give you a scientific popularization of shandong forklift truck when loading and unloading goods to pay attention to what matters:
1、山东叉车在叉载物品时，应按需调整两货叉间距，使两叉负荷均衡，不得偏斜，物品的一面应贴靠挡货架，叉载的重量应符合载荷中心曲线标志牌的规定。
1. when forklifting goods, shandong forklift truck should adjust the spacing between two forks according to need so as to balance the load of two forks and not to deviate. one side of the goods should be attached to the shelf, and the weight of forklift should conform to the requirements of the load center curve sign.
2、载物高度不得庶挡驾驶员的视线。
2. the height of the load must not obstruct the driver's sight.
3、在进行物品的装卸过程中，必须用制动器制动叉车。二手叉车的技术参数是用来表明叉车的结构特征和工作性能的。主要技术参数有：额定起重量、载荷中心距、大起升高度、门架倾角、大行驶速度、小转弯半径、小离地间隙以及轴距、轮距等。
3. brakes must be used to brake forklift trucks during loading and unloading. the technical parameters of used forklift trucks are used to show the structural characteristics and working performance of forklift trucks. the main technical parameters are: rated lifting weight, load center distance, maximum lifting height, gantry inclination, maximum speed, minimum turning radius, minimum ground clearance, wheelbase, wheelbase, etc.
4、货叉车接近或撤离物品时，车速应缓慢平稳，注意车轮不要碾压物品、木垫等，以免碾压物飞起伤人。
4. when the forklift truck approaches or evacuates the goods, the speed should be slow and steady. pay attention to the wheel not to crush the articles, wooden mats, etc., in order to avoid the crushing objects flying up and hurting people.
5、用货叉叉取货物时，货叉应尽可能深地叉入载荷下面，还要注意货叉尖不能碰到其它货物或物件。应采用小的门架后倾来稳定(解释:稳固安定;没有变动)载荷，以免载荷向后滑动。放下载荷时，可使门架小量前倾，以便于安放载荷和抽出货叉。
5. when picking up goods with forks, the forks should be placed as deep as possible under the load, and the fork tip should not touch other goods or objects. minimum portal tilt should be used to stabilize the load (explanation: stable stability; no change) so as to prevent the load from sliding backwards. when the load is lowered, the portal frame can be tilted forward slightly so as to place the load and pull out the fork.
山东叉车在装卸货物的时候要注意哪些事项？
what matters should shandong forklift truck pay attention to when loading and unloading goods?
6、禁止高速叉取货物和用叉头缶坚硬物体碰撞。
6. it is forbidden to fork goods at high speed and collide with hard objects with forks.
7、叉车作业时，禁止人员站在货叉上。
7. when a forklift truck is working, it is forbidden to stand on a fork.
8、叉车叉物作业，禁止人员站在货叉周围，以免货物倒塌伤人。
8. forklift truck forklift operations, forbidden personnel standing around the forklift, in order to avoid cargo collapsing and injuring people.
9、禁止用贷叉举升人员从事高处作业，以免发生高处坠落事故。
9. it is forbidden to use loan fork to lift personnel to engage in high-altitude operations in order to avoid high-altitude falling accidents.
10、不准用制动惯性溜放物品。
10. no braking inertia is allowed to slide articles.
recently, there are many reports about forklift incidents on the internet, which shows that the safety of forklift operation is very important, especially when loading and unloading goods. next shandong forklift truck manufacturer henghua logistics will give you a scientific popularization of shandong forklift truck when loading and unloading goods to pay attention to what matters:
1、山东叉车在叉载物品时，应按需调整两货叉间距，使两叉负荷均衡，不得偏斜，物品的一面应贴靠挡货架，叉载的重量应符合载荷中心曲线标志牌的规定。
1. when forklifting goods, shandong forklift truck should adjust the spacing between two forks according to need so as to balance the load of two forks and not to deviate. one side of the goods should be attached to the shelf, and the weight of forklift should conform to the requirements of the load center curve sign.
2、载物高度不得庶挡驾驶员的视线。
2. the height of the load must not obstruct the driver's sight.
3、在进行物品的装卸过程中，必须用制动器制动叉车。二手叉车的技术参数是用来表明叉车的结构特征和工作性能的。主要技术参数有：额定起重量、载荷中心距、大起升高度、门架倾角、大行驶速度、小转弯半径、小离地间隙以及轴距、轮距等。
3. brakes must be used to brake forklift trucks during loading and unloading. the technical parameters of used forklift trucks are used to show the structural characteristics and working performance of forklift trucks. the main technical parameters are: rated lifting weight, load center distance, maximum lifting height, gantry inclination, maximum speed, minimum turning radius, minimum ground clearance, wheelbase, wheelbase, etc.
4、货叉车接近或撤离物品时，车速应缓慢平稳，注意车轮不要碾压物品、木垫等，以免碾压物飞起伤人。
4. when the forklift truck approaches or evacuates the goods, the speed should be slow and steady. pay attention to the wheel not to crush the articles, wooden mats, etc., in order to avoid the crushing objects flying up and hurting people.
5、用货叉叉取货物时，货叉应尽可能深地叉入载荷下面，还要注意货叉尖不能碰到其它货物或物件。应采用小的门架后倾来稳定(解释:稳固安定;没有变动)载荷，以免载荷向后滑动。放下载荷时，可使门架小量前倾，以便于安放载荷和抽出货叉。
5. when picking up goods with forks, the forks should be placed as deep as possible under the load, and the fork tip should not touch other goods or objects. minimum portal tilt should be used to stabilize the load (explanation: stable stability; no change) so as to prevent the load from sliding backwards. when the load is lowered, the portal frame can be tilted forward slightly so as to place the load and pull out the fork.
山东叉车在装卸货物的时候要注意哪些事项？
what matters should shandong forklift truck pay attention to when loading and unloading goods?
6、禁止高速叉取货物和用叉头缶坚硬物体碰撞。
6. it is forbidden to fork goods at high speed and collide with hard objects with forks.
7、叉车作业时，禁止人员站在货叉上。
7. when a forklift truck is working, it is forbidden to stand on a fork.
8、叉车叉物作业，禁止人员站在货叉周围，以免货物倒塌伤人。
8. forklift truck forklift operations, forbidden personnel standing around the forklift, in order to avoid cargo collapsing and injuring people.
9、禁止用贷叉举升人员从事高处作业，以免发生高处坠落事故。
9. it is forbidden to use loan fork to lift personnel to engage in high-altitude operations in order to avoid high-altitude falling accidents.
10、不准用制动惯性溜放物品。
10. no braking inertia is allowed to slide articles.
上一篇：叉车属具行业发展与叉车发展趋势
下一篇：电动叉车的锂电池介绍！