电动叉车叉取货物的八个步骤是怎样的?
发布时间:2022-02-03 点击:589
在电动叉车就是指以电来开展工作的叉车,大部分全是为电瓶工作中。而电瓶是充电电池中的一种,它的功效是可以把比较有限的电磁能储存起来,在适合的地区应用。它的原理便是把机械能转换为电磁能。电动叉车的蓄电池内窗的也就是这类电瓶。要留意的是:充电电池不必横着!由于,充电电池的內部一般是22~28%的稀盐酸。充电电池正放的情况下锂电池电解液能够吞没极片而且还剩余一点空间假如把充电电池横着得话会出现一部分电极板曝露在空气中,这对充电电池的极片十分不好,并且一般的充电电池的观查孔或是充电电池的顶端都是有排气管与外部互通,因此 充电电池横着锂电池电解液非常容易排出。
in the electric forklift is to carry out the work of electric forklift, most of them work for the battery. the battery is a kind of rechargeable battery, its effect is that it can store the relatively limited electromagnetic energy and apply it in suitable areas. its principle is to convert mechanical energy into electromagnetic energy. electric forklift battery inside the window is this kind of battery. note that the rechargeable battery does not have to be horizontal! because the inside of the rechargeable battery is generally 22-28% dilute hydrochloric acid. when the rechargeable battery is placed, the electrolyte of the lithium battery can engulf the pole piece, and there is still a little space left. if the rechargeable battery is laid horizontally, part of the electrode plate will be exposed to the air, which is very bad for the pole piece of the rechargeable battery. in general, the inspection hole of the rechargeable battery or the top of the rechargeable battery has an exhaust pipe to communicate with the outside, so the electrolyte of the rechargeable battery is easily discharged across the lithium battery.
电动叉车提示您叉车取货物的八个步骤,电动叉车叉取货品。叉车叉取货品的全过程,能够归纳为八个姿势。
the electric forklift reminds you of the eight steps for forklift to pick up goods. the whole process of forklift picking up goods can be summarized into eight postures.
1、驶近货垛。叉车发展后,依据货垛部位,安全驾驶叉车行车至货垛前边停好。
1. approach the stack. after the development of forklift, the forklift should be driven safely to the front of the stack according to the position of the stack.
2、竖直龙门架。叉车停好后将换挡杆放进空档,将歪斜操作手柄往前推,使龙门架还原至竖直部位。
2. vertical gantry. after the forklift is stopped, put the shift lever into the neutral position and push the slanting handle forward to restore the gantry to the vertical position.
3、调节叉高。向后拉升降机操作手柄,提高叉车货叉,使叉车货叉的叉尖指向货下空隙或拖盘叉孔。
3. adjust the fork height. pull back the operating handle of the lifting machine to raise the fork of the forklift so that the fork tip of the fork points to the gap under the goods or the fork hole of the towing tray.
4、进叉提货。将换挡杆挂进前行一挡,叉车往前迟缓行车,使货叉叉进货下空隙或拖盘的叉孔。当叉臂触碰货品时,叉车制动系统。
4. pick up the goods by fork. put the shift lever into the first forward gear, and the forklift moves slowly forward, so as to make the space under the fork or the fork hole of the towing plate. when the fork arm touches the goods, the brake system of the forklift is closed.
5、微提叉车货叉。向后拉升降机操作手柄,使叉车货叉升高到叉车能够离去运作的高宽比。
5. micro lift forklift fork. pull the operation handle of the lifting machine backward to raise the fork of the forklift to the height width ratio where the forklift can leave.
6、后倾龙门架。向后拉歪斜操作手柄,使龙门架往后仰至極限部位。
6. tilt the gantry back. pull the tilt handle backward to make the gantry tilt back to the limit position.
7、撤出储位。将换挡杆挂后倒一挡,减轻制动系统,叉车倒退到货品能够落下来的部位。
7. withdraw storage. shift the shift lever back to the next gear to reduce the braking system, and the forklift will go back to the place where the goods can fall down.
8、调节叉高。往前推升降机操作手柄,下发叉车货叉至距路面200-300mm的高宽比。向后起动,驶往入货地址。
8. adjust the fork height. push forward the operation handle of the lift and deliver the forklift to the height width ratio of 200-300 mm from the road surface. start backward and drive to the loading address.
实际操作工作人员要严苛依照要的提货步骤实行.操作工安全隐患,人为因素实际操作便是有安全风险在。
the actual operation staff should be strict in accordance with the delivery steps. the hidden danger of operator safety, human factors, the actual operation is a safety risk.